Back
w-arb80-ffs-4.0-r
w-schacht-vls-ffs-4.0-r
Shaft system self-supporting

Shaft system 4.0 with spacer mounting

Available in a height of up to 2.200 mm and in a width of up to 4.000 mm, the self-supporting façade systems 2.2 and 4.0 from HELLA /integrate outdoor blinds and Venetian blinds installation-friendly into recesses provided by the clients. For a self-supporting installation, the channel is directly put onto the guide rails. Raising and lowering the curtain and tilting of the slats is done via a convenient motor drive. The motor with integrated limit stops can optionally be operated via a control device, a remote control or an automatic device.

Possible slat types: External venetian blinds AF 60 / AF 80, outdoor blinds ARB 80, outdoor blinds AR 63 / AR 92

Colour worlds
pdf • 18.14 MB • Brochure material
Outdoor blinds & venetian blinds
pdf • 6.62 MB • Brochure material
max. width 4000 mm
max. blind surface 20 m²
Scroll down
Types of drives
Control devices
Download
Further products
Types of drives
informationen-varianten-antriebsarten-motor
Motor
The unit is operated via convenient motor drive. The electric motor with integrated limit stops can be operated via control devices, hand-held radio transmitters or automatic devices, if desired.
informationen-varianten-antriebsarten-kurbel
Crank handle
Manually raising and lowering of the shading via crank handle.
Control devices
informationen-varianten-steuerungen-kabelgebunden-schalter
Wired with switch
Electronic control via switch
informationen-varianten-steuerungen-funksteuerung
Radio control
HELLA shadings can be raised or lowered at the flick of your wrist.
informationen-varianten-steuerungen-smart-home-onyx
SMART HOME ONYX
The center box ONYX.CENTER serves as interface between the smart phone and the individual control nodes and transmits radio commands bidirectionally.
Download
Further documents on this product can be found in the download area
To the download area
Further products